Kategorier

HY-CONNECTR® 100 bar valves & fittings for lye eloctrolyte and hydrogen

(4 produkter)
Sortér efter:
Ball valve for lye/lute electrolyte tubing and hydrogen tubing

Ball valve for lye/lute electrolyte tubing and hydrogen tubing

HY-CONNECTR® is the smart alternative to the traditional double ferrule connection type brands.

Benefits compared to double ferrule fittings are:
• Cost effectiveness.
• Quick assembly / disassembly.
• Tight connection by low torqe.
• Ability to disassemble the installed piping system without compromising the tightness of the installed piping system.

Connection: Nut with O-rings and ferrule.
Design pressure: 100 bar / 1.500psi. (Tested to 500 bar without leakage)
Max. working pressure: 100 bar / 1.500psi.
Operating temperature: -25°C to +135°C.
Material: 1.4404 / AISI316L.

Designed for the following media:
Lye/ Lute, Hydrogen, Potassium hydroxide, Natrium hydroxide and (Amonia on request).

This ball valve is used with other HY-CONNECTR® products found on this website.

Needle valve for lye / lute electrolyte and hydrogen tubing

Needle valve for lye / lute electrolyte and hydrogen tubing

HY-CONNECTR® is the smart alternative to the traditional double ferrule connection type brands.

Benefits compared to double ferrule fittings are:
• Cost effectiveness.
• Quick assembly / disassembly.
• Tight connection by low torqe.
• Ability to disassemble the installed piping system without compromising the tightness of the installed piping system.

Connection: Nut with O-rings and ferrule.
Design pressure: 100 bar / 1.500psi. (Tested to 500 bar without leakage)
Max. working pressure: 100 bar / 1.500psi.
Operating temperature: -25°C to +135°C.
Material: 1.4404 / AISI316L.

Designed for the following media:
Lye/ Lute, Hydrogen, Potassium hydroxide, Natrium hydroxide and (Amonia on request).

This needle valve is used with other HY-CONNECTR® products found on this website.

Elbow for lye / lute electrolyte and hydrogen tubing

Elbow for lye / lute electrolyte and hydrogen tubing

HY-CONNECTR® is the smart alternative to the traditional double ferrule connection type brands.

Benefits compared to double ferrule fittings are:
• Cost effectiveness.
• Quick assembly / disassembly.
• Tight connection by low torqe.
• Ability to disassemble the installed piping system without compromising the tightness of the installed piping system.

Connection: Nut with O-rings and ferrule.
Design pressure: 100 bar / 1.500psi. (Tested to 500 bar without leakage)
Max. working pressure: 100 bar / 1.500psi.
Operating temperature: -25°C to +135°C.
Material: 1.4404 / AISI316L.

Designed for following media:
Lye/ Lute, Hydrogen, Potassium hydroxide, Natrium hydroxide and (Amonia on request).

This elbow is used with other HY-CONNECTR® products found on this website.

Straight coupling for lye/lute electrolyte tubing and hydrogen tubing

Straight coupling for lye/lute electrolyte tubing and hydrogen tubing

HY-CONNECTR® is the smart alternative to the traditional double ferrule connection type brands.

Benefits compared to double ferrule fittings are:
• Cost effectiveness.
• Quick assembly / disassembly.
• Tight connection by low torqe.
• Ability to disassemble the installed piping system without compromising the tightness of the installed piping system.

Connection: Nut with O-rings and ferrule.
Design pressure: 100 bar / 1.500psi. (Tested to 500 bar without leakage)
Max. working pressure: 100 bar / 1.500psi.
Operating temperature: -25°C to +135°C.
Material: 1.4404 / AISI316L.

Designed for the following media:
Lye/ Lute, Hydrogen, Potassium hydroxide, Natrium hydroxide and (Amonia on request).

This straight coupling is used with other HY-CONNECTR® products found on this website.